seense logo

Zoeetree+s1+user+manual+pdf «Tested & Working»

This guide covers everything you need to know about the ZoeeTree S1 Bluetooth Speaker Go to product viewer dialog for this item.

  1. Check the QR code in the box – scanning it usually leads to a support page with a PDF link.
  2. Look on the Zoeetree official website → Support / Downloads section.
  3. Search Amazon (if you bought it there) → product listing → product guides & documents.
  4. Direct link pattern (may change):
    https://www.zoeetree.com/pages/download or /support

Maintenance: To preserve the battery's lifespan, the manufacturer recommends fully charging the unit at least once every 30 days. 5. Technical Persona (Specifications) Connectivity Bluetooth 4.2 Audio Setup Dual high-sensitivity drivers & passive bass radiator Hands-free Built-in microphone for speakerphone calls Input Ports 3.5mm AUX, TF Card Slot, Micro-USB (Charging) Note: There is also a Zoeetree S1 Smart Multimeter zoeetree+s1+user+manual+pdf

: Insert the 3.5mm cable to act as an antenna, then press the "M" or FM button to switch modes. Press the power button once in this mode to auto-search for channels. Micro SD Card : The speaker supports reading Micro SD cards (up to 16GB). m.media-amazon.com Battery and Charging This guide covers everything you need to know

Turn on the speaker; it defaults to Bluetooth mode (indicated by a blue flashing light or voice prompt "Bluetooth mode"). Enable Bluetooth on your mobile device and search for S1. Check the QR code in the box –

3. How to Use

A. Powering On/Off

Slide the power switch to the ON position. The OLED screen will light up. Slide to OFF to power down.

: If you experience static or connection drops, move the speaker away from other high-frequency electronics or reorient its position to avoid signal interference. Apple Support Community specific feature , like hands-free calling or using a TF card with your S1?