_best_ — V2000-c Rfid Access Control User Manual

V2000-C RFID Access Control User Manual

1. Introduction

The V2000-C is a standalone RFID access control system designed for single-door management. It supports EM/Mifare (13.56MHz & 125KHz) card reading, a durable waterproof keypad, and a 3-color LED status indicator.

• Integrated LCD Display (often 2.4 inches) showing date, time, and status prompts (e.g., "Access Granted," "Access Denied").

Conclusion

Operating the V2000-C System

• Red: Standby (Power ON).
• Green: Access granted (Door open).
• Flashing Red + Beep: Invalid card / Wrong PIN.

LED Indications:

4.2 Wiring Diagram (Simplified)

| Controller Terminal | Connects To | | :--- | :--- | | 12V+ / GND | Power adapter (12V DC) | | NO / COM | Electric lock (Normally Open) | | NC / COM | Electric lock (Normally Closed) | | PUSH | Exit button (momentary switch) | | D-IN | Door contact/magnetic sensor | V2000-c Rfid Access Control User Manual

Troubleshooting and FAQs

(Note: this is an instructional and practical guide meant to complement the official user manual. Always consult the manufacturer’s manual and local regulations before installation.) V2000-C RFID Access Control User Manual 1