Tgc Bc901h Manual File

The TGC BC-901H bathroom remote control allows precise temperature adjustment (35°C–60°C), priority selection, and pre-heat activation for compatible instantaneous gas water heaters. Users can manage settings via a digital display that also indicates safe operating temperatures and troubleshooting codes. For the complete user manual, see Towngas Appliance.

Automatic Ignition: Simply turn on a hot water tap. The burner ignites automatically, and the operation light will turn yellow.

: Regularly check the cold water filter for debris to ensure the water flow remains strong enough to keep the burner alive. tgc bc901h manual

Adjust Temperature: Use the Up and Down arrow buttons to set your desired heat. The default factory setting for the first use is typically

often require a specific sequence (like holding the button) to prevent accidental scalding. Priority Button The TGC BC-901H bathroom remote control allows precise

Remote Convenience: Many units support an optional remote controller for the bathroom so you don't have to walk to the kitchen to turn up the heat.

: Air intake or exhaust blockage. Ensure the external vent is not obstructed. Cut the leading edge of the paper roll straight

  1. Cut the leading edge of the paper roll straight.
  2. Insert the paper firmly into the paper slot on the back of the calculator.
  3. Press the FEED or PAPER ADVANCE button until the paper catches and feeds through the mechanism.
  4. Insert the paper roll into the holder.

4. Changing the Ink Ribbon

If your printouts are faint, it’s time to change the ribbon.