Tenda D301 Firmware Update Work Guide

Updating the firmware of your Tenda D301 ADSL2+ Modem Router

Step 3: Upload the Firmware

  • Click “Browse” and select the .bin (or .trx) file you downloaded.
  • Crucially: Double-check the filename matches your hardware.
  • Click “Upgrade” or “Upload.”

Tenda D301 Firmware Updates: Improving Performance and Stability Keeping your Tenda D301 Wireless N300 ADSL2+ Modem Router Go to product viewer dialog for this item. tenda d301 firmware update work

For official support, contact Tenda via their hotline or service email listed on their website. Updating the firmware of your Tenda D301 ADSL2+

2.2 Step-by-Step Process

  1. Factory Reset: Press the reset button for 10 seconds to clear conflicting settings.
  2. Access Web Interface: Navigate to http://192.168.1.1 (default credentials: admin/admin).
  3. Navigate to Update: Go to Advanced → Management → Upgrade Firmware.
  4. Select File: Choose the correct firmware file (e.g., D301_V3.0.0.16_EN.bin).
  5. Start Update: Click “Upgrade”. Do NOT power cycle or refresh for 3-5 minutes.
  6. Automatic Reboot: The router will reboot. Reconnect and verify firmware version.
  1. Set your PC’s IP manually to 192.168.0.10 (subnet mask 255.255.255.0).
  2. Unplug the router. Hold the Reset button while plugging it back in. Keep holding for 15 seconds until the Power LED flashes slowly.
  3. Open a browser and go to 192.168.0.1 – you should see a minimal recovery page. Upload the firmware again.

Part 6: Proactive Maintenance – Keeping Your Tenda D301 Healthy

A successful firmware update is not an annual task. Set reminders to check for updates every 3–6 months. Click “Browse” and select the

Verify Version: Check your current version under System Status or Administration in the router settings to ensure you aren't trying to install an older or identical version. 2. Downloading the Correct File Visit the official Tenda Download Center.

3. Cannot Access 192.168.1.1

  • Ensure your computer is set to "Obtain an IP address automatically."
  • Try a different browser or clear your browser cache.
  • Check if your Local Area Connection is enabled on your PC.