Staples 17466 Laminator Manual |link| ❲EASY❳
Arthur Penhaligon sat in his dusty home office, staring at a stack of water-damaged family recipes. To save them, he’d need the beast on his desk: the Staples 17466 Thermal Laminator Go to product viewer dialog for this item.
Step 3 – Preparing the Pouch
- Place document inside a thermal laminating pouch (up to 3 mil thickness).
- Ensure the sealed edge of the pouch goes into the machine first.
- Center the document with at least 1/8 inch margin around all sides.
Wait for Ready Light: The "Wait" indicator will flash during preheating. Once the green "Ready" light illuminates, the machine has reached the required temperature. 2. The Laminating Process staples 17466 laminator manual
Before starting, ensure the laminator is on a stable surface with at least 20 inches of clear space behind it to allow documents to exit freely. Arthur Penhaligon sat in his dusty home office,
thermal settings based on your pouch thickness. For heat-sensitive documents, use the setting with self-adhesive pouches. Place document inside a thermal laminating pouch (up
: Some reviewers noted the machine stopped working or developed a "burning smell" after a few months of low-volume use. Heat Concerns
- Hot Lamination: Uses heat to seal standard thermal pouches (3 mil, 5 mil, and 10 mil).
- Cold Lamination: Uses pressure only for adhesive-backed pouches (ideal for heat-sensitive inkjet prints or photos).
- Free Document Sizes: It supports letter (8.5” x 11”), legal (8.5” x 14”), and up to 9” wide pouches.
- Two Roller System: Uses two silicone rollers to press the pouch flat.
No Comments