Standard Construction Specifications Part 3 Abu Dhabi

Standard Construction Specifications Part 3 Abu Dhabi: A Comprehensive Guide

, Part 3 is dedicated to the practical "boots-on-the-ground" phase of a project. Key focus areas include: Installation Procedures standard construction specifications part 3 abu dhabi

1. Cement: Cement must conform to the relevant UAE standards.
2. Aggregates: Aggregates must conform to the relevant UAE standards.
3. Steel: Steel reinforcement and structural steelwork must conform to the relevant UAE standards.
4. Finishing Materials: Finishing materials, such as paints, coatings, and flooring materials, must conform to the manufacturer's recommendations and the SCS requirements.

In the context of Abu Dhabi’s regulatory framework, specifications are often organized into volumes or sequential parts to handle the sheer scale of the city's growth. Standard Construction Specifications Part 3 Abu Dhabi: A

4. Waterproofing (Section 3.8) – Critical for Abu Dhabi’s climate

• Roofs: Torch-applied APP modified bitumen membrane (two layers, total thickness ≥ 4 mm). Must pass a 48-hour ponding test.
• Wet areas (bathrooms, swimming pools): Cementitious crystalline waterproofing or liquid applied polyurethane, with cove fillets at wall-floor junctions.
• Planters and retaining walls: Drainage composite + dimpled HDPE membrane required to prevent hydrostatic pressure.

3.9 PROTECTION, CLEANING & HANDOVER

3.9.1 Protection

Subgrade and Paving: Requirements for subgrade preparation, compaction methods, and tolerances. For example, joint filling for paving blocks must comply with standards like BS 7533-3:2005. Cement : Cement must conform to the relevant UAE standards