Sinotimer Tm630s - Manual

SINOTIMER TM630S Manual Report

Initial setup

1. Power the unit following wiring diagram on rear/label. Ensure power type matches your model.
2. Watch the LCD initialize; use Left/Right to select time/date entry.
3. Set current time:
4. Release the Clock button. The current time is now set.

1. Incorrect Timing: Check the programmed timing values and adjust as needed.
2. Input/Output Issues: Verify the input and output configurations and adjust as needed.
3. Display Issues: Check the display settings and adjust as needed.

1. Power on the unit. The screen will light up.
2. Hold down the Clock button for 3 seconds until the seconds start flashing.
3. Press + (Day) to set the current minute.
4. Press Clock to confirm minutes and move to Hour.
5. Press + or - to set the hour. Note: Watch for the AM/PM indicator if using 12H mode.
6. Press Clock to confirm Hour and move to Day.
7. Press + to set the current day (MO=Monday, TU=Tuesday, etc.).
8. Press Clock to save and exit.

is a heavy-duty, weekly programmable digital timer designed to automate electrical equipment by switching power on and off at preset intervals. Capable of handling loads up to 30 Amps (5000 Watts), it is commonly used for streetlights, water heaters, air conditioners, and agricultural equipment. Key Technical Specifications sinotimer tm630s manual

You must hold down the clock icon button while making these adjustments: Current Day until the correct day appears (e.g., Mon, Tue). Current Hour Current Minute Current Second 12/24 Hour Toggle : Press and hold the button on its own for 5 seconds to switch formats. 📅 3. Programming ON/OFF Schedules SINOTIMER TM630S Manual Report Initial setup