Simco Fmx002 — Manual Top

The Simco-Ion (and its successor, the ) is a handheld electrostatic fieldmeter used for locating and measuring static charge potentials. Quick Setup & Operation : Press the Distance Alignment : Point the sensor at the target. Align the two LED guide ring lights

Calibration: Manufacturers like Micro Precision offer specialized calibration services to ensure the device meets industrial accuracy standards.

• Protection: The actual sensor element (a vibrating capacitor or fieldmill transducer) sits recessed behind this guard. Touching it with a tool or finger can damage the delicate diaphragm.
• Accurate Spacing: The guard ensures a consistent distance from the charged surface. The manual specifies that for absolute voltage readings (not relative), you should hold the top guard flush against the surface (for conductive surfaces) or at a fixed distance (usually 1 inch / 25mm for non-contact readings).

The SIMCO FMX002 offers a range of features and benefits, including: simco fmx002 manual top

Measuring Range: 0 to ±1.49 kV (Low range); ±1.0 kV to ±20.0 kV (High range). Accuracy: Within ±10% of the measured value.

Before diving into the operation, it’s important to understand what makes the a staple in static control: Wide Measurement Range: Measures up to . The Simco-Ion (and its successor, the ) is

System Components

Range: 0 to ±1.49 kV (Low range); ±1.0 kV to ±20.0 kV (High range). Protection : The actual sensor element (a vibrating

Visual Indicators: The FMX-002 uses a bar graph (red for positive, blue for negative) and a three-digit digital display for precise numerical data.