Upgrade - Satlink Ws-6979 Software
Upgrading the software on your Satlink WS-6979 is a straightforward process handled via the device's USB port. This handheld combo meter supports DVB-S/S2/T/T2/C and MPEG-4 H.265 (8-bit) decoding. Preparation Checklist
7. Conclusion
The software upgrade for the Satlink WS-6979 was executed successfully. The device now operates with an up-to-date satellite database, resolving signal lock failures experienced prior to the update. The unit is fully operational and ready for field deployment. Satlink Ws-6979 Software Upgrade
- Insert the microSD card into the WS-6979.
- Power on the meter.
- Navigate to Menu → System → Software Upgrade → From SD Card.
- Select the firmware file and confirm.
Once finished, the device will typically restart automatically. You can then check the version in the "System Information" menu to verify the update was successful. Important Safety & Maintenance Tips Avoid Power Failure: Upgrading the software on your Satlink WS-6979 is
Do not fear the upgrade. With this guide, you have the roadmap to breathe new life into your Satlink WS-6979. Happy satellite hunting! Insert the microSD card into the WS-6979
Ensure the battery is charged to at least 50% or connect the device to the AC adapter to prevent it from shutting down during the update. Step-by-Step Upgrade Process
Moderate. Power failure or cable disconnection during the roughly 2-minute process can "brick" the device. Step-by-Step Upgrade Process
If you encounter any issues during the upgrade process, here are some common problems and solutions: