Renault Kangoo Ze Service Reset Top May 2026

Technical Service Bulletin: Renault Kangoo Z.E. Service Light Reset Procedure

Document ID: RENAULT-EV-SVC-002
Vehicle Model: Renault Kangoo Z.E. (Phase 1 & 2 – X61 platform)
Model Years: 2011 – 2020
Subject: Resetting the Service Interval Indicator (Oil/Service spanner light)

: If the message doesn't clear, ensure your doors are closed, as some Renault systems won't allow a reset while an "Open Door" warning is active. Persistent Lights renault kangoo ze service reset top

  1. Ignition OFF.
  2. Press and hold the button on the end of the wiper stalk (or trip button if no stalk button).
  3. Turn ignition ON.
  4. Cycle through menus using the same button until you see “TOP” and a mileage counter.
  5. Press and hold the button again for 10 seconds – “TOP” should flash and reset to 0.
  6. Turn ignition OFF.

Cargo Space: Because the batteries are stored under the floor, it retains the same generous cargo volume as the standard Kangoo. Technical Service Bulletin: Renault Kangoo Z

Using aftermarket OBD scanner (e.g., Autel, Launch, Topdon):

Q: Will disconnecting the battery reset the service light?

No. The service interval is stored in non-volatile EEPROM memory. Removing the 12V battery for a week will not clear it. You must use the button sequence or a scanner. Ignition OFF

Method 3: The "Top" Professional Tool (When All Else Fails)

If the manual methods above fail, or if you have a complex fault code stored that is keeping the light on, you need the "Top" professional solution: The Renault CLIP or a high-quality OBDII Scanner.

Scanner Method: If manual reset fails, you may need an OBDII scanner (like Klavkarr) to clear the "Maintenance Interval ECU" electronically.