Psa Xs Evolution 9780.z5 Driver |verified| -
The PSA XS Evolution (9780.Z5) is a hardware interface used for dealer-level diagnostics on Peugeot and Citroën vehicles, typically paired with DiagBox, Lexia 3, or PP2000 software. Driver & Software Information
Activation Loops: Often caused by trying to run the software on Windows 10/11 without a Virtual Machine. Most experts on the Peugeot Forums suggest using a pre-configured VMware image to bypass driver and compatibility headaches. Psa Xs Evolution 9780.z5 Driver
1.2 Key Specifications
- Input Voltage: 24-80 VDC
- Peak Current: 7.8 A per phase
- Microstepping: Up to 256 microsteps/step
- Communication Interface: Isolated proprietary UART over a 6-pin LEMO connector (non-standard pinout)
- Feedback: Supports incremental encoder and Hall sensors
- Protection: Overcurrent, overtemperature, and short-circuit protection
4.2 Blue screen (BSOD) on axis enable
- Cause: The driver’s interrupt handler conflicts with ACPI power management on newer motherboards.
- Workaround: In the BIOS, set “Plug and Play OS” to No and assign a dedicated IRQ (usually IRQ 10 or 11) to the PCI/ISA slot where the motion card resides.
Success rate: About 70% for rev .z5 hardware. Some units have a locked OTP (one-time programmable) memory that prevents reflashing. The PSA XS Evolution (9780
software, this driver acts as the bridge that allows your PC to communicate with the vehicle's electronic control units (ECUs). Key Features and Capabilities Input Voltage: 24-80 VDC Peak Current: 7