Metal Detector Manual 2021 — Orbitor Prospector 100

The Ultimate Guide to the Orbitor Prospector 100 Metal Detector Manual

Water-Resistant Coil: The search coil is typically water-resistant, allowing for shallow-water exploration at the beach or in damp grass. Orbitor Prospector 100 Metal Detector Manual

1. Set Discrimination to "0" (All Metal).
2. Find a patch of ground with no metal (test by sweeping).
3. Pump the coil from 1 inch to 8 inches off the ground.
4. Listen closely. If the tone gets LOUDER as you lift the coil, the ground is highly mineralized.
5. Fix: Turn the Sensitivity down slowly until the "up/down" tone signal disappears.

• Hearing protection: Always use headphones in loud environments to avoid hearing fatigue.
• Pacemaker warning: Persons with electronic medical implants (pacemakers) should NOT use this metal detector. The search coil emits an electromagnetic field.
• Ground conditions: Do not use near high-voltage power lines, radio transmitters, or underground utility cables.
• Safe digging: Always check local laws before digging. Call 811 (USA) or local utility locators to mark buried wires/pipes.
• Battery safety: Use only 9V alkaline batteries. Do not reverse polarity or recharge non-rechargeable batteries.
• Weather: Do not expose control box to rain or submersion. Wipe dry after use in damp grass.

Tuning: Use the Easy Tuning Switch to calibrate the device for your current environment. The Ultimate Guide to the Orbitor Prospector 100

Orbitor Prospector 100 Metal Detector – User Manual

Version 2.0 | English | SKU: OP100-MD