Maintenance Box Resetter For Epson L6170 ((new)) May 2026

The Epson L6170 is a powerhouse EcoTank printer, but like all precision machines, it eventually hits a wall: the notorious "Maintenance Box is at the end of its service life" error.

The resetter is a hardware tool designed to override this chip, resetting the counter back to zero so the printer assumes a new box has been installed. maintenance box resetter for epson l6170

Maintenance Box Resetter for Epson L6170

What it is

A maintenance box resetter is a tool (software, hardware, or procedure) used to reset the printer’s maintenance box counter. The Epson L6170 tracks ink waste collected in an internal maintenance box; when the counter reaches a threshold the printer stops printing and shows a “Service required” or “The ink pad is at the end of its service life” message. Resetting the counter lets the printer resume operation without replacing the maintenance box, though the physical waste absorber may still be full. The Epson L6170 is a powerhouse EcoTank printer,

Reinstall and Restart: Slide the maintenance box back into the printer and power it on. The "End of Service Life" error should disappear, and your ink level indicator will show a full maintenance tank. Hardware vs. Software Resetters The Resetter is a Lie: It tells the

⚠️ Final note

Epson L6170 is not a CISS/continuous ink system with an external waste tank — so a generic "maintenance box resetter" from older models will not work. You need the C9342-specific chip resetter.

• The Resetter is a Lie: It tells the printer the tank is empty.
• The Reality: The tank is still full of ink.
• Best Practice: If you reset the chip, you must either open the maintenance box and replace/clean the absorbent felt pads inside, or ensure you have a physically empty box.

Consider the cost: