How To Use Secret Codes On Motorola Moto G Stylus -

Secret codes on the Motorola Moto G Stylus, such as #06# for IMEI and

1. Open the Dialer App: Go to the Dialer app on your MOTOROLA Moto G Stylus, which is usually located on the home screen or in the app drawer.
2. Enter the Secret Code: Type in the secret code using the keypad, making sure to enter the correct sequence of numbers and symbols.
3. Press the Call Button: Once you've entered the secret code, press the call button to execute the code.
4. View the Results: The secret code will either perform a specific task or display information on your screen.

If the Engineering Mode code (*#*#2486#*#*) fails to open, you can manually trigger it through Fastboot Mode: Turn off your phone. How to Use Secret Codes on MOTOROLA Moto G Stylus

2. The Code Requires Root Some advanced engineering codes (like changing RF power levels) are disabled by the kernel. You would need to root your Moto G Stylus via Magisk to re-enable them. Rooting voids your warranty. Secret codes on the Motorola Moto G Stylus,

• What it does: Creates a white canvas where your finger/stylus traces appear as colored lines.
• Why use it: Test the stylus pressure sensitivity. Draw diagonal lines slowly—if they skip or jump, the digitizer may have a dead zone.

Quick reference table

| Action | Typical code / method | |---|---| | Phone/battery info | ##4636## | | Factory reset (dialer) | ##7780## | | Camera info | ##34971539## | | Wi‑Fi MAC | ##232338## | | Bootloader / fastboot | Button combo at boot (Power + Volume Down) | | Recovery mode | Bootloader → Recovery (Power + Volume combos) | Open the Dialer App : Go to the

| Code | Function | |------|-----------| | *#*#4636#*#* | Phone Information – View signal strength (RSRP, RSRQ), cell tower ID, network type (LTE/NR), run ping tests, set preferred network (LTE only/5G). | | *#*#7262626#*#* | Enable/disable VoLTE (Voice over LTE) provisioning flag. | | *#*#232338#*#* | Display Wi-Fi MAC address and connection diagnostics. | | *#*#197328640#*#* | Service Mode Main Menu – RRC, NAS, and GPRS debug (advanced). |

• *#06#: Displays the device's IMEI number.
• *#0#: Enters the device's diagnostic mode.
• ##4636##**: Displays information about the device's battery, including its health and temperature.
• ##7594##**: Changes the device's power button behavior.
• ##197328640##**: Enters the device's service mode.
• ##8351##**: Activates the device's GPS logging.
• ##8350##**: Deactivates the device's GPS logging.

Using secret codes on your Motorola Moto G Stylus Go to product viewer dialog for this item.