How To Install Ezp2019 Driver Windows 10 ~upd~

Installing the EZP2019+ programmer on Windows 10 is a two-part process. Because the drivers are often unsigned, Windows 10 will block the installation by default, requiring you to temporarily disable "Driver Signature Enforcement" before running the setup. Step 1: Disable Driver Signature Enforcement

  • Go to the official WCH.cn website (search "WCH CH341 driver").
  • Download CH341SER.EXE (the setup executable for USB-to-serial, which includes SPI mode). Note: Even though the EZP2019 is not just a serial adapter, this driver package contains the necessary DLLs and INF files.

Step 3: Install the CH341 Driver

  1. Run CH341SER.EXE as Administrator (right-click > Run as administrator).
  2. Click Install.
  3. Wait for the pop-up: "Driver installed successfully".
  4. Unplug and Re-plug the EZP2019.

Your PC will boot into Windows normally, but will now allow unsigned drivers. Step 2: Connect the Hardware Plug your EZP2019 programmer into a USB port. how to install ezp2019 driver windows 10

Navigate to your EZP2019 driver folder (typically named installer_x64 for 64-bit systems). Installing the EZP2019+ programmer on Windows 10 is

Back To Top