I Reset My Parrot Mki9200 Without Remote //top\\ | How Do

Resetting a Parrot MKi9200 typically requires the wireless remote to navigate menus. However, if you have lost or broken the remote, you can still perform a reset using the methods below. Method 1: Using Steering Wheel Controls (Unika Interface)

Step-by-step:

  1. Locate the small LCD screen (the color display).
  2. Look on the back edge of the screen casing. You will find two very small, recessed buttons labeled "<<" and ">>" (previous/next track) or sometimes just two unlabeled tactile buttons.
  3. Press and hold both buttons simultaneously for about 10 seconds.

    steering wheel interface installed, you can use the factory steering wheel buttons to trigger a reset. JustCarKits Track Forward, Track Back, Track Forward, Track Back in a quick, continuous sequence. Navigation If successful, you will enter the Parrot menu. Track Forward to scroll to "Settings" Phone/Accept button to enter the menu and navigate to "Advanced Settings" "Factory Reset" and confirm with the : The unit will clear its memory and reboot. JustCarKits Method 2: System Reboot (Soft Reset) how do i reset my parrot mki9200 without remote

    button to scroll through the voice-guided or screen menu until you reach "Settings" Access Advanced Settings : Press the Phone/Accept Call button to enter the menu, then scroll to "Advanced Settings" and press the Phone button again. Execute Factory Reset : Scroll down to "Factory Reset" and press the Phone button to confirm. The device will clear its memory and reboot. JustCarKits Method 2: Disconnecting Power (Hard Reboot) Resetting a Parrot MKi9200 typically requires the wireless

    The Bad News: It seems impossible to fully factory reset the MKi9200 without the remote. The "Settings" menu—where the "Restore Factory Settings" option lives—is navigable, but the specific reset function is often blocked or requires a specific key combination that only exists on the remote. Locate the small LCD screen (the color display)

    1. If the unit still broadcasts as “Parrot MKi9200” but the screen is frozen, try connecting a phone that was previously paired.
    2. Once connected, use the Parrot Companion App (available for older Android versions or via APK; iOS app is no longer supported).
    3. Within the app, go to Device Settings > Restore Factory Defaults. This sends a reset command via Bluetooth without needing the remote.

    Troubleshooting Tips

    Warning: Not all MKi9200 revisions have this pinhole. If you don’t see one, do not drill into the box. Instead, try Method 3.

X