Harvey Hv3 Water Softener Installation Manual -

Installing a Harvey HV3 water softener involves placing the non-electric, twin-cylinder unit on a level surface, connecting it to the mains via a bypass manifold, and establishing proper drain and overflow lines. The installation requires 1–6 bar of pressure, with specialized kits for 15mm or 22mm pipes to manage inlet and outlet connections. For detailed technical guidance and installation procedures, consult the official documentation at Harvey Water Softeners.

Use standard flexible braided steel or heavy plastic hoses with the included washers. harvey hv3 water softener installation manual

Step 7: Adjust Softness Blend (Bypass Setting)

The HV3 allows you to blend hard water with softened water to avoid a “slimy” feel. Installing a Harvey HV3 water softener involves placing

Access to Drainage and Overflow: You will need a suitable upstand or an outside drain nearby, featuring a proper air gap to prevent back-syphonage. 🛠 Step-by-Step Installation Process Use standard flexible braided steel or heavy plastic

Commissioning Instructions: A key highlight is the detail on the manual regeneration process, which involves rotating a commissioning tool or button to flush the system and check for leaks.