The FirstChip FC1179 firmware is typically bundled within "MpTools" (Mass Production Tools) used to repair or reflash USB drives. You can download these utility packages from major community archives like FlashBoot.ru or the FirstChip FC1179 section on USBDev.ru. Recommended Download Links
Start: Press "Start" and wait for the "OK" status. Warning: This wipes all data.
Settings (Bin Config): Most users can leave this on "Default." If the drive isn't detected, you may need to go into "Settings" (password is usually blank or 123456) and ensure the FC1179 controller is selected. firstchip fc1179 firmware link
Do not download the FC1179 tool blindly. Many drives look the same on the outside but use different chips on the inside. Using the wrong firmware can permanently brick your drive.
The most reliable version for FC1179 is MPTools v1.0.5.6 or v1.0.6.2. The FirstChip FC1179 firmware is typically bundled within
is a popular controller used in low-cost and promotional USB flash drives. Finding the correct firmware and mass production (MP) tools is essential for repairing "Read Only" errors, fixing corrupted partitions, or restoring drives that aren't recognized by Windows. Common Firmware & MP Tools
Before downloading software, verify your hardware. Using the wrong firmware can "brick" the drive (make it permanently unusable). 🖥️ Use ChipGenius Download a tool called ChipGenius. It will provide: Controller Vendor: FirstChip Controller Part-Number: FC1178 or FC1179 Flash ID: The specific code for the memory chip inside. ⚠️ Important Safety Tips Stability: 6/10 – Works for low-end TLC/QLC NAND
High Compatibility: Works with a wide variety of NAND flash types.