Ericsson Mini Link Cli Commands !free! -

The Ericsson MINI-LINK Command Line Interface (CLI) is an essential tool for telecommunications engineers, offering a powerful alternative to graphical user interfaces for configuring, managing, and troubleshooting microwave transmission nodes. Access and Modes

: Essential for checking IP status and port details. Frequently used commands include show ip interface brief show port detail show port 1/21 transceiver to inspect Rx/Tx power. Connectivity Diagnostics : Standard utilities such as traceroute are built-in to test reachability between network elements. Management & Maintenance ericsson mini link cli commands

7.2 ODU (Outdoor Unit) Commands

admin> odu info
admin> odu lldp neighbors
admin> odu reset

• config → interface ethernet-eps lan-dcn → usage bridge-port
• config → ip address on the NE management interface
• config → vlan and assign ports per topology

interface ethernet 1 service-policy input backhaul The Ericsson MINI-LINK Command Line Interface (CLI) is

sh interface ethernet-eps: Lists all Ethernet interfaces and their current status. 3. Configuration & Management interface ethernet 1 service-policy input backhaul

Submodes: Specific sub-configuration modes exist for Ethernet, VLANs, IP Routers, and Serial Interfaces .

6. Viewing the ARP Table

Sometimes the link is up, but the management IP isn't responding.

• Via Ethernet (Management port): Default IP is often 10.10.10.1/24 (check your node’s sticker).
• Via Serial (RS-232): 9600 baud, 8 data bits, 1 stop bit, no parity, no flow control.
• Via Telnet/SSH: SSH is strongly recommended. Ensure IP reachability.