Dvb01 User Manual _top_

The DVB01 is a multifunctional voltage monitoring controller designed for high-accuracy direct voltage measurement (0V to 100V) and relay control. It features an industrial-grade microcontroller and offers five user-selectable functions. Core Specifications

Relay closes when the voltage is either below the lower limit or above the upper limit. 4. Parameter Programming (Setting Mode) Enter Settings: Long press to enter the selection interface (displays "P-0"). Select Parameter: Short press to cycle through parameters P-0 to P-5 Function Selection (F-01 to F-05). Lower Limit Voltage (0.0V to 99.9V). Upper Limit Voltage (0.0V to 99.9V). Voltage Calibration (match display to a known voltmeter). Delay for Relay Pull-in (0.0 to 99.9s). Delay for Relay Disconnect (0.0 to 99.9s). Adjust Values: buttons to change values. Use to switch between digits (flashing). Save & Exit: Long press to save all settings and return to normal operation. 5. Special Features dvb01 user manual

  1. Press the "Menu" button and select "Channel Management".
  2. Select "Search for Channels" to scan for available channels.
  3. Use the arrow buttons to select a channel and press "OK" to add it to your channel list.
  4. To delete a channel, select the channel and press the "Delete" button.
  • Current Consumption: Low power draw, optimized for long battery life during field use.
    1. Press the "Menu" button on the remote control to access the main menu.
    2. Use the arrow buttons to navigate through the menu options.
    3. Press the "OK" button to select a menu option.
    4. Use the "Back" button to return to the previous menu.