Digi Sm-500 Scale User Manual

Introduction

Environmental Sensitivity: Can be sensitive to extreme temperature and humidity changes. digi sm-500 scale user manual

Display Icons:

• STABLE / OK – Reading is locked and accurate.
• g / oz / ct / gn – Current unit of measure (grams, ounces, carats, grains).
• TARE – Indicates a tare weight is active.
• LO BAT – Batteries are low (replace soon).
• EEEEE / ERR – Overload (remove weight immediately).

7. Error Codes & Troubleshooting

| Error Code / Issue | Probable Cause | Solution | | :--- | :--- | :--- | | Unstable Display | Wind, vibration, or unstable surface. | Move scale away from drafts; ensure table is stable. | | ---- or Over | Weight exceeds capacity. | Remove weight immediately to prevent damage. | | Error P | Printer error (Paper jam or out of paper). | Open printer, reload paper, clear jam, and close cover. | | Error E | Memory error or overload. | Turn scale off, unplug for 30 seconds, and restart. | | Labels misaligned | Sensor issue or paper loaded incorrectly. | Reload labels ensuring the gap sensor aligns with the label gap. | | Zero Error | Scale was turned on with weight on platter. | Remove weight and press ZERO. | STABLE / OK – Reading is locked and accurate

Leveling: Users must adjust the scale's feet until the air bubble in the level indicator is centered. unplug for 30 seconds

9. Technical Specifications

| Parameter | Value | |-----------|-------| | Max Capacity | 500g | | Resolution (readability) | 0.01g or 0.1g (check your model) | | Repeatability | ±0.01g (0.01g models) / ±0.1g (0.1g models) | | Linearity | ±0.02g | | Warm-up time | 30–60 seconds for best accuracy | | Operating temperature | 10°C – 40°C (50°F – 104°F) | | Display | 5-digit LCD with backlight (select models) | | Dimensions (body only) | 130mm x 110mm x 40mm (approx) | | Pan diameter | 100mm (stainless steel) |

Program (P) Mode: Used for entering product data, such as Price Look-Up (PLU) numbers.