Bosch Serie 6 Service Mode → «FULL»

Entering service mode on Bosch Serie 6 appliances varies by the type of machine. This mode is used for running component tests and viewing saved error codes. Washing Machines For most Serie 6 washing machines, follow these steps: Turn the program selector knob to the position (Spin/Drain). Press and hold the Spin Speed (RPM)

How to Enter Service Mode:

1. Open the door slightly.
2. Press and hold the Power button.
3. While holding Power, press the Start button three times within one second.
4. Release the Power button.
5. Close the door. The display (if available) will show a code, or the status lights will flash in a sequence.

Here is a breakdown of the most useful menus for the average user: bosch serie 6 service mode

The "6 O’Clock" Position: Turn the program dial to the 6 o'clock position (usually the "Spin/Drain" setting). Entering service mode on Bosch Serie 6 appliances

The Standard "Button Combo" Method

Preparation: Turn the machine off. Wait 10 seconds for the capacitors to discharge. Ensure the drum is empty. Open the door slightly