Ascorel Mc 382 Manuel

The Ascorel MC 382 is an on-board weighing and totalizing system specifically designed for bucket loaders to enhance loading accuracy and productivity. It works by calculating the load in the bucket using data gathered from pressure and position sensors installed on the loader's chassis. Key System Capabilities

  • Entrées/Sorties :

    Accuracy is everything when you're loading. If your team is using the Ascorel MC 382 ascorel mc 382 manuel

    Chapter 4: How to Use the Cassette Recorder (Step-by-Step)

    One of the most requested sections in any Ascorel MC 382 manuel is the recording function. Here is how to do it correctly. The Ascorel MC 382 is an on-board weighing

    • F 1 : Delay-on-Make (Power starts timer, relay activates at end of time).
    • F 2 : Interval (Input starts timer, relay drops out at end of time).
    • F 3 : Flashing (Asymmetrical flasher – relay toggles on/off).
    • F 4 : Cumulative (Retentive timer – stops/starts via input).
    • F 5 : Counter mode (Counts external pulses).
    • Press PROG to save F1 selection.

    6.1 Accès au Menu

    1. Appuyez sur la touche PROG ou MENU.
    2. Entrez le mot de passe si demandé.
    3. Naviguez avec les touches fléchées ($\uparrow$, $\downarrow$) et validez avec ENT.
    1. Check the manufacturer's website: Look up the manufacturer's website and search for the product model number. They may have a downloads or support section where you can find manuals or documentation.
    2. Contact the manufacturer directly: Reach out to the manufacturer's customer support or technical support team and ask if they have a manual or documentation available for the product.
    3. Search online archives: There are several online archives and databases that store user manuals and documentation for various products. You can try searching for the product model number along with keywords like "manual" or "documentation".

    This guide summarizes the key sections typically found in the MC 382 user manual, providing a reference for operation, maintenance, and technical setup. 1. Core System Overview F 1 : Delay-on-Make (Power starts timer, relay

    | Error Code | Meaning | Solution | | :--- | :--- | :--- | | E-01 | Power supply failure (internal) | Replace unit (internal capacitor blown). | | E-02 | Input short circuit or over-voltage | Disconnect sensor. Check for 24V short. | | E-03 | Parameter corruption (memory error) | Power off for 10 seconds. Hold UP + DOWN while powering on to hard reset. | | --- | Overflow (Counter > 9999) | Reset the counter or change time base. |