Apeman A79 Firmware Update -

Apeman A79 Firmware Update: A Step-by-Step Guide to Fixing Bugs and Boosting Performance

The Apeman A79 is a popular budget-friendly dash cam known for its 4K resolution, supercapacitor design (ideal for hot climates), and built-in GPS. However, like any digital device, its performance heavily depends on the software it runs—known as firmware.

  1. Turn on the Apeman A79.
  2. Stop recording (press the red button).
  3. Press the Menu button twice to enter the System Setup menu.
  4. Scroll to Version or System Info.
  5. Write down the number (e.g., A79_20211208_V1.2).
  • Download only official firmware:

    Frequently Asked Questions

    6. Post-update checks

    • Confirm boot and normal function: preview, record video, capture photos, playback.
    • Test key features: Wi‑Fi, HDMI output, microphone, battery charging and runtime, time-stamp accuracy.
    • Check file saving to SD card, and that existing files remain accessible (that’s why you backed up first).
    • Observe for anomalies (weird artifacts, audio sync issues, frequent reboots). If issues appear, see troubleshooting below.

    Q: The update failed, and now my camera won’t turn on at all. What now? A: This is a bricked device. Try holding the reset button (pinhole near the lens) for 10 seconds. Disconnect battery (if possible). If no response, contact Apeman support for warranty replacement. Apeman A79 Firmware Update

    Format the card to FAT32 on your computer before putting it into the camera. Apeman A79 Firmware Update: A Step-by-Step Guide to