Apc Ups Wake On Lan Best

Integrating an APC UPS with Wake-on-LAN (WoL) is a common strategy to ensure your hardware automatically resumes operation after a graceful shutdown during a power outage. Because the UPS itself does not send WoL "magic packets," success depends on configuring your computer's BIOS and your APC management software to work together.  Best Configuration for Automatic Recovery 

• ❌ Don’t rely on “Restore power after UPS shutdown” alone – many BIOS options require manual intervention.
• ✅ Instead, send a magic packet every 30–60 seconds for 5 minutes after power restores (in case the NIC wakes late).
• ✅ Test without a real power loss – unplug UPS, let it drain to low battery, then restore.

NIC Driver Settings (via Device Manager):

- Enable "Wake on Magic Packet"

- Enable "Wake on Pattern Match"

- Disable "Allow the computer to turn off this device" (paradoxical but works)

- Set "Shutdown Wake-on-LAN" to Enabled

is the "magic packet" sent over your local network to turn that PC back on once power is restored and stable. 2. Best APC Setup for WoL Compatibility apc ups wake on lan best